emulsion chopped strand mat 300g/m2

1.good mat integrity 2 low fuzz 3.high dry 4.wet tensile strength 5.good transparence

Emulsion Chopped Strand Mat is mainly applied to unsaturated polyester,viny ester and epoxy resins.

the product is most widely used in hand lay-up process and can be used in filament winding, compression molding and continuous laminating process. the typical end products including various panels,boats, bath equipment, automotive parts and cooling towers.

   

product features

Mat width ranges from 5mm to 3120mm. uniform density ensures consistent fiberglass content and mechanical properties of the final products. the mats feature good mat integrity, low fuzz, less material waste and small roll diameter, excellent flexibility ensures good moldability with no springback at sharp angles, fast and consistent wet-out speed in resins and rapid air lease enhangce molding productivity and mechanica properties of the products. the product have high dry and wet strength and good transparency.

Property	Glass Type	Area Weight(%)	Moisture  Content(%)	Combustible Content(%)	Breakage Strength(N)	Width(mm)
EMC225	E	-5.0/+10.0	≤0.50	3.6-6.3	≥60	±5
EMC300	E	-5.0/+10.0	≤0.50	3.2-5.4	≥90	±5
EMC375	E	-5.0/+10.0	≤0.50	2.8-4.8	≥100	±5
EMC450	E	-5.0/+10.0	≤0.50	2.5-4.2	≥120	±5
EMC600	E	-5.0/+10.0	≤0.50	2.3-3.9	≥150	±5
EMC900	E	-5.0/+10.0	≤0.50	2.1-3.6	≥180	±5

packing

each emulsion chopped strand mat is wound onto a  paper tube and then wrapped up with plastic film, which can be packed in cardboard box or wrapped up with kraft paper.the rolls are to be horizontally placed.rolls can be loaded into container directly or on pallets.

emulsion chopped strand mat 300g/m2